measurement and evaluation of gas density and viscosity of pure gases and mixtures
in this application mr. badarlis (aristotle university of thessaloniki) and his colleagues developed a gas cell setup for measurement of gas density and viscosity by using a scl micro-cantilever beam (prsa-l300-f50). in parallel, the validity of a proposed modelling approach was evaluated.
博乐红包扫雷群the density and viscosity of gases are orders of magnitude lower than liquids. for this reason, the use of a very sensitive sensor is essential. although the used cantilever was designed to work with thermal activation, it was activated with an electromagnetic force. therefore, the heater structure on the cantilever was driven with an alternating current and the cantilever itself was placed in front of a permanent magnet. the deflection of the cantilever beam was detected by an integrated piezo-resistive sensor on the cantilever.
six pure gases and sixteen mixtures of them in ambient conditions were investigated. the outcome of the investigation showed that the current cantilever beam had a sensitivity of 240 hz/(kg/m3), while the accuracy of the determined gas density and viscosity in ambient conditions reached ±1.5% and ±2.0%, respectively.
anastasios badarlis et al.: measurement and evaluation of the gas density and viscosity of pure gases and mixtures using a micro-cantilever beam. sensors 2015, 15(9), 24318-24342; published: 2015 sept. 22, doi:10.3390/s150924318.